Show flyer is located on the ATV Event page.

	1. ATV Safety:

   	A.	Any ATV being used in exhibition or competition must have two different
        	points of shut off that are functional and operational, that will terminate
        	the ignition; I.E. ignition switch and kill switch. Both shut offs must 
        	be accessible from the outside of the unit.
   	B.	ATV must be operated in a safe manner at all times, following a speed limit
        	of 5 M.P.H when ATV's are not performing.
   	C.	Only one participant will be allowed in/on an ATV when it is being moved 
        	and/or driven.
   	D.	There will be no off course riding permitted other than in designated 
        	warm-up and pit areas. Or in adjacent areas without permission, or outside
        	of the scheduled practice or competition times.
   	E.	Loose objects will not be permitted in/on ATV. Any object either thrown or
        	dropped from an ATV could result in disqualification of that run.
   	F.	There shall be no sharp or protruding edges on a competition ATV.
   	G.	ATV must be clean and tidy in appearance and mechanically sound prior to 
        	any riding on course.

	2. Participant Safety:

   	A.	All participants must be on the ATV, and be in complete control of the ATV
        	at all times while the ATV is running, while in any pit or public area.
        	All participants may be subject to a check of his/her driving ability at
        	any time.
   	B.	All participants are required to wear an approved protective helmet 
        	(minimum Snell M2000/DOT 218) during competition, A full-face helmet is 
        	recommended. A chest protector and proper footwear when operating an ATV 
        	on the course.
   	C.   Participant eye protection is required during all events/challenges. Safety
        	goggles or shields that are approved for motor sports competition will
        	suffice.Chest Protector: commercially available.Helmet: Must be DOT or 
        	Snell M2000 approved with functional chin strap.Foot Wear: Closed toe,
        	closed heal, and must cover the ankle.

	Stock requirements:

	Stock:  (1) Mass production unit commercially available which cannot have any 
       		aftermarket or performance motor improving enhancements.
       		(2) Stock units are allowed toexchange or substitute: Tires, rims, exhaust,
       		throttle and brake controls, handlebars, and handlebar mounts.

	Classes (If you bring it we will have a class)

	2WD
	160 – 300cc Utility
	301 – 500cc Utility
	160 – 300cc Sport
	301 – 500cc Sport

	4WD
	160 – 300cc Stock
	301 – 500cc Stock
	501 – 800cc Stock
	
	UTV/XUV

	Open Mod Challenge 

	Registration $15.00 per class

	Gates open @ 8:00 am

	Racing starts @ Noon

	1 ATV/UTV on the track at one time.

	Timed event against the clock.

	Track is approx ¼ mile in length.

	Consists of MUD PIT, LOGS, SAND HILLS & OBSTACLES.